BLPJS - 1-341 SNPF ALKYD ENAMEL TRIM COLOR COPPER VERDE

  • MSDS: BLPJS
  • Manufacturer: PPG INDUSTRIES INC
  • Product Name: 1-341 SNPF ALKYD ENAMEL TRIM COLOR COPPER VERDE
  • National Stock Number: 8010-00F019088
Product Identification

Product ID:1-341 SNPF ALKYD ENAMEL TRIM COLOR COPPER VERDE
MSDS Date:05/21/1982
FSC:8010
NIIN:00F019088
MSDS Number: BLPJS

Responsible Party
PPG INDUSTRIES INC
ONE GATEWAY CENTER
PITTSBURGH, PA 15222

Emergency Phone: (304) 843-1300

Info Phone: (304) 843-1300

Cage: 93915

Contractor
PPG INDUSTRIES INC CHEMICAL DIVISION
PITTSBURGH, PA 15222-1416 US

Telephone: 304-843-1300

Cage: 93915

Ingredients

MINERAL SPIRITS, PETROLEUM SPIRITS

CAS: 64475-85-0

RTECS: PY8240000

Fraction By Weight: <35%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM


ETHYL BENZENE (SARA III)

CAS: 100-41-4

RTECS: DA0700000

Fraction By Weight: <5%

OSHA PEL 100 PPM/125 STEL

ACGIH TLV: 100 PPM/125STEL 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


1,3-DIOXOLAN-2-ONE, 4-METHYL-DIPROPLYENE CARBONATE,

CAS: 108-32-7

RTECS: FF9650000

Fraction By Weight: <0.5%

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: ANESTHETIC, IRRITATION OF
THE RESPIRATORY TRACT OR NERVOUS SYSTEM DEPRESSION, HEADACHE,
DIZZINESS, STAGGERING GAIT, CONFUSION, UNCONSCIOUSNESS, OR COMA.
SKIN/EYES: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: ANESTHETIC, IRRITATION OF THE
RESPIRATORY TRACT, NERVOUS SYSTEM DEPRESSION, HEADACHE, DIZZINESS,
STAGGERING GAIT, CONFUSION, UNCONSCIOUSNESS, OR COMA. SKIN/EYES:
IRRITATION.

First Aid

First Aid:INHALATION: REMOVE FROM EXPOSURE. RESTORE BREATHING. KEEP
WARM & QUIET. EYES: FLUSH W/COPIOUS QUANTITIES OF RUNNING WATER FOR
AT LEAST 15 MINS. SKIN: WASH AFFECTED AREAS W/WATER. OBTAIN MEDICAL
ATTENT ION IN ALL CASES.

Fire Fighting

Flash Point Method:PMCC
Flash Point:114F
Lower Limits:1%
Extinguishing Media:CO2, DRY CHEMICAL OR FOAM
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE. IF WATER IS
USED, FOG NOZZLES ARE PREFERABLE. FULL PROTECTIVE CLOTHING & SELF
CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:WATER SPRAY MAY BE USED TO COOL CLOSED
CONTAINERS TO PREVENT PRESSURE BUILD-UP, POSSIBLE AUTOIGNITION &
EXPLOSION WHEN EXPOSED TO EXTREME HEAT.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION, FLAMES, HOT
SURFACES, ELECTRICAL, STATIC, OR FRICTIONAL SPARKS. VENTILATE AREA.
REMOVE W/INERT ABSORBENT & NON-SPARKING TOOL.

Handling

Handling and Storage Precautions:DON'T STORE >120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED & PROTECTED FOR STORAGE OF NFPA
CLASS II COMBUSTIBLE LIQUIDS. DON'T TAKE INTERNALLY.
Other Precautions:CONTAINERS SHOULD BE GROUNDED WHEN POURING. AVOID
FREE FALL OF LIQUID IN EXCESS OF A FEW INCHES. DON'T FLAME CUT,
BRAZE OR WELD W/O NIOSH APPROVED RESPIRATORS OR APPROPRIATE
VENTILATION.

Exposure Controls

Respiratory Protection:OUTDOOR/OPEN AREAS: USE FILTER RESPIRATOR TC21C
TO REMOVE SOLID AIRBORNE PARTICULATES FROM OVERSPRAY. USE
COMBINATION ORGANIC VAPOR-FILTER RESPIRATORS TC23C DESIGNED TO
PURIFY THE AIR BY REMOVING SOLI D AIRBORNE PARTICULATES/ORGANIC
VAPORS.
Ventilation:PROVIDE GENERAL DILUTION OR LOCAL EXHAUST IN VOLUME &
PATTERN TO KEEP Protective Gloves:AS REQUIRED
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:AS NEEDED
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:277-468F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:46.17%

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HOT SURFACES, HEAT, ELECTRICAL EQUIPMENT,
SPARKS & OPEN FLAME, STATIC, OR SPARKS. TEMP >120F.
Hazardous Decomposition Products:CO, HYDROGEN CHLORIDE, CHLORINATED
PRODUCTS, CHLORINE

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS. DON'T INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.